A quoted price is not comparable until you know what the amount includes: rated suspended mass, hose, fittings, mounting hardware, GST, freight and installation. By the end, you will have a supplier-question checklist, a safe way to compare DATHS models, and the dimensional information needed to approve a quotation for your workstation.
Key takeaways
- Request itemized pricing for hose, swivel, clamp, bracket, GST and freight.
- Compare DATHS 15, 25 and 35 against the complete suspended load.
- Confirm hose length, travel distance, mounting space and installation method.
- Ask suppliers for ratings, lead time, warranty and quotation validity.
Why air tool hose suspender prices in Gurugram vary
A low headline figure is not a comparable air tool hose suspender price in gurugram if it excludes the hose, swivel, clamp, ceiling bracket, GST, freight, or installation. Compare quotations only after each supplier states the same scope, quantity, delivery location, and validity period.
1. Ask for the model and safe working load. The quotation must identify the maximum suspended mass, not merely a spring rating or maximum tool weight. Include the air tool, hanging hose, coupler, whip-check, and accessories in the load calculation.
2. Require the usable hose length and confirm whether the hose is included. “Air hose included” is incomplete without internal diameter, maximum working pressure, material, end fittings, and replacement availability. A small-bore hose can create greater pressure loss at the same length.
3. Request the complete mounting scope. List the swivel, clamp, anchor plate, fasteners, and any ceiling-mount or commissioning work separately, because thin-sheet anchoring or a low-rated swivel can make an otherwise adequate suspender unsafe.
4. Make the commercial basis explicit: unit quantity, GST included or extra, freight to Gurugram, delivery term, dispatch location, lead time, stock status, and quotation validity.
5. Ask for warranty exclusions and replacement-part terms. Confirm whether overload, hose abrasion, spring damage, and installation faults are excluded, and price the spring or hose if replacements are needed.
A quotation that omits these fields cannot establish whether DATHS-15, DATHS-25, DATHS-35, or DATHS-50 offers the better value. Compare like-for-like scope, not the largest number printed beside the model.
What to include in a DATHS quotation request
Send the complete suspended mass, not just the tool’s name or catalogue weight. Include the air tool, hanging hose, coupler, whip-check, swivel and every attached accessory. Ask the DATHS 25 supplier to state this figure as the safe working load, separate from spring capacity or maximum tool weight.
Include these hose and workstation measurements:
- Hose outside diameter, material, total length and the length that must hang below the suspender
- Required mounting height, tool parking height, effective working radius and desired travel
- Hose outlet direction, minimum bend radius and the available mounting-hole pattern
- Daily operating hours, cycles per shift, pull frequency and the minimum and maximum suspended load
Request a dimensional drawing showing the overall body dimensions, total retracted length and mounting hardware. Without those dimensions, a correctly rated unit can still foul the workstation or force the hose into a damaging bend.
| Quotation detail | What to request | Why it matters |
|---|---|---|
| Rated load | Safe working load in kilograms | Prevents selection by spring rating alone |
| Hose supply | Hose included, excluded or separately priced | Exposes an incomplete headline price |
| Operating features | Adjustable spring tension, travel stop and locking or anti-drop feature | Determines balance, reach and tool retention |
For a DATHS 15 price comparison, confirm whether “15” means kilograms, hose length or a series number. Also ask for freight to Gurugram, GST treatment, installation charges, delivery basis and quotation validity.
How to choose the rating at a load boundary
Select the next higher DATHS rating when the complete suspended assembly reaches the stated safe working load; do not select by the tool’s weight alone. Add the air tool, hanging hose, coupler, whip-check and every attached accessory, then compare that total with the supplier’s declared safe working load.
| Option | What to verify | Decision at the boundary |
|---|---|---|
| DATHS 15 | Confirm that “15” means kilogram capacity, not hose length or series number | Reject the model until the quotation states its safe working load |
| DATHS 25 | Require the maximum suspended mass as a safe working load, not a spring rating or maximum tool weight | Choose it only when the complete assembly remains below that limit with operating margin |
| DATHS 35 | Check usable travel and retraction force at both minimum and maximum load | Choose it only when it lifts and positions the actual assembly across its full working range |
A DATHS 15 price comparison is meaningless if the suffix has not been defined. A DATHS 25 supplier should state the load basis, included hose, mounting parts, GST, freight and delivery terms. A DATHS 35 air hose suspender that carries 35 kg but cannot retract the installed hose is unsuitable.
Ask whether spring tension is adjustable and whether the unit has a travel stop or locking and anti-drop feature. These affect balance and control. Add independent secondary retention when a dropped tool could reach personnel; the suspender rating is not fall arrest or tool retention.
Check fit, travel and installation before ordering
A quoted unit works only if its dimensions, travel and safe working load match the existing workstation. Check the mounting height, available overhead clearance, tool position and the hose path before comparing the DATHS 35 air hose suspender with another model.
Ask the supplier for a dimensional drawing, not only a catalogue photograph. Confirm the mounting-hole pattern, overall body dimensions, hose-outlet direction, minimum bend radius, effective working radius and total retracted length. A correct load rating does not fix a body that clashes with a beam or a hose that kinks at full extension.
- Weigh the complete suspended assembly: air tool, hanging hose, coupler, whip-check and accessories. The quotation must state this total as a safe working load; a spring rating or maximum tool weight is not enough.
- Test usable travel and retraction at both the minimum and maximum load. A DATHS 35 that supports 35 kg but cannot retract the actual assembly will leave slack hose and defeat overhead positioning.
- Confirm adjustable spring tension, a travel stop and a locking or anti-drop feature. Get each function stated in writing, because these controls affect balance and operator safety.
- Check the mounting hardware and verify that the hose stays clear of people, sharp edges, hot surfaces and moving machinery throughout the working radius.
A suspender is not fall arrest. If a dropped tool could strike personnel, specify an independent secondary retention arrangement suited to that tool and workstation.
How to evaluate a supplier in Gurugram and across India
A supplier’s delivery promise is useful only when it names the dispatch location, stock status, lead time, delivery basis and destination charges. Ask whether the quoted date means dispatch from Gurugram or arrival at your site, and record the quotation validity, minimum order quantity, GST treatment and freight separately.
Your air tool hose suspender supplier India shortlist should be tested with these requests:
1. Ask for a written specification showing the safe working load for the quoted model, usable hose length, mounting hardware and included accessories. For a DATHS 25, the load calculation must include the air tool, suspended hose, coupler, whip-check and every attached accessory—not only the tool’s nameplate weight.
2. Request hose details: internal diameter, material, end fittings, maximum working pressure and replacement-part availability. Reject “air hose included” as a complete description; a small-bore hose can create greater pressure loss at the same length. Compare rated working pressure with your system pressure, never burst pressure.
3. Confirm after-sales terms in writing, including replacement spring and hose availability, response channel, warranty duration and exclusions for overloading, abrasion and incorrect installation. Ask whether commissioning or ceiling-mount installation is included or charged separately.
4. Ask for installation instructions, inspection intervals, spare-part identification and a load or retraction test procedure. For DATHS 35, the supplier should confirm usable travel and retraction force at both minimum and maximum load.
Hendo Industries should be asked for these same documents before its quotation is compared with another supplier.
Related products
 | AIR TOOL HOSE SUSPENDER AIR TOOL HOSE SUSPENDER- DATHS-35 The AIR TOOL HOSE SUSPENDER (2.5Kg-3.5Kg) DATHS-35 by Hendo Industries is a reliable and efficient industrial solution designed to support pneumatic... View product → |
 | AIR TOOL HOSE SUSPENDER AIR TOOL HOSE SUSPENDER- DATHS-15 The AIR TOOL HOSE SUSPENDER – DATHS-15 (0.5Kg-1.5Kg) by Hendo Industries is a lightweight and efficient industrial solution designed to support... View product → |
Frequently asked questions
Why do air tool hose suspender prices in Gurugram vary?
Quotes differ when suppliers include different combinations of the hose, swivel, clamp, ceiling bracket, GST, freight, installation, quantity and delivery terms. Compare identical scopes before judging price.
What should you include in a DATHS quotation request?
State the model, quantity, tool and hose details, suspended load, required hose length, travel distance, mounting arrangement, delivery location, installation requirement and quotation validity period.
How do you choose a DATHS rating at a load boundary?
Calculate the complete suspended load, including the tool, hose and fittings, then compare it with the model rating. Ask the supplier to confirm the selection when the calculated load approaches the rating limit.
What should you check before ordering an air tool hose suspender?
Confirm the suspender fits the tool and hose, provides sufficient travel, and suits the available ceiling or support structure. Check the bracket, clamp, swivel and installation method.
How do you evaluate an air tool hose suspender supplier in Gurugram or India?
Compare technical confirmation, itemized scope, delivery commitment, warranty, installation support, after-sales contact and quotation validity alongside the price.
Related products
 | AIR TOOL HOSE SUSPENDER AIR TOOL HOSE SUSPENDER- DATHS-25 The AIR TOOL HOSE SUSPENDER – DATHS-25 (1.5Kg-2.5Kg) by Hendo Industries is a compact and efficient solution designed to support pneumatic tools and... View product → |
 | FLAT SERIES SPRING BALANCER FLAT SERIES SPRING BALANCER HSB-1 The HSB-1 Flat Series Spring Balancer by Hendo Industries is a compact and efficient lifting solution designed to improve productivity and reduce... View product → |
