A 50 kg or 80 kg manipulator has no reliable per-kilogram market price because reach, tooling, mounting, actuation and installation can change the quotation substantially. By the end, you will know how to compare DRA quotations, calculate usable payload, specify the job clearly and judge whether a manipulator is better suited than a crane, hoist or other handling method.
Key takeaways
- Compare total installed cost, not the arm price alone.
- Separate rated capacity from the payload your workstation actually needs.
- Specify reach, rotation, controls, tooling, and installation before requesting quotes.
- Choose 50 kg, 80 kg, or another method based on task cycle and load geometry.
What You Are Paying For in a 50 kg or 80 kg Manipulator
A manipulator suspends a component so an operator can pick it up, lift it, position it, rotate it, and release it without carrying the full load. Its arm, controls, and end-effector convert that movement into a controlled workstation task.
The stated 50 kg or 80 kg rating applies at a specified reach, height, centre of gravity, and mounting arrangement—not to every load in every position.
The equipment price includes more than the arm:
- Arm geometry, reach, vertical stroke, column or overhead mounting, and swept clearance
- Pneumatic or electric lift, controls, sensors, pendant, and required utilities
- Gripper, hook, vacuum frame, magnetic lifter, clamp, or custom fixture
- Installation, commissioning, operator training, preventive-maintenance documents, and warranty support
- Replacement seals, cylinders, drives, sensors, pendant controls, and gripper spares available in Chennai
A 50 kg rating can leave little usable payload after tooling weight, while an 80 kg unit still loses capacity to a heavy fixture or eccentric component. Ask for both gross rated capacity and net product payload at your actual reach and cycle rate.
The search phrase manipulator price 50 kg 80 kg in chennai therefore cannot yield one reliable per-kilogram figure. A material handling manipulator in chennai could be a balancer, articulated arm, column unit, rail system, or custom machine, each with a different price and service burden.
How to Compare DRA 50 kg and DRA 80 kg Manipulator Price
A 50 kg or 80 kg headline capacity does not tell you the usable payload, reach, tooling weight or price. A dra 50 kg manipulator price cannot be compared with a dra 80 kg manipulator price until both quotations describe the same working conditions.
“DRA” must also match the supplier’s exact model code or product family. It could identify a balancer, articulated manipulator, dual-arm unit or a manufacturer-specific designation. A brochure price is not a valid benchmark.
| Capacity comparison | 50 kg model | 80 kg model |
|---|---|---|
| Rated load | State gross rated capacity | State gross rated capacity |
| Net payload | Subtract gripper, hook, vacuum frame, magnet or fixture | Subtract the same tooling costs |
| Working position | Show reach, radius, vertical travel and load centre of gravity | Show reach, radius, vertical travel and load centre of gravity |
| Configuration | Identify pneumatic or electric operation and mounting type | Identify pneumatic or electric operation and mounting type |
Request both quotations with:
- “50 kg net payload at [reach]” or “80 kg net payload at [reach]”
- Product dimensions, centre of gravity, rotation requirements, cycle rate and duty cycle
- Gripper design, tooling mass and the load chart
- A general-arrangement drawing showing swept envelope, stroke, mounting footprint, operator clearance and utility connections
- Installation, commissioning, training, warranty, service response and delivery scope for your Chennai site
Without these details, “manipulator price 50 kg 80 kg in Chennai” compares unlike equipment rather than two workable solutions.
Rated Capacity Versus Usable Payload at the Workstation
Usable payload is the component’s weight after subtracting the gripper, hook, vacuum frame, clamp or fixture. A 50 kg or 80 kg headline rating is incomplete unless the quotation states whether that figure is gross capacity or net product payload.
| Factor | Effect on usable payload | What to verify |
|---|---|---|
| Component weight | A 48 kg component leaves little margin on a 50 kg unit; an 80 kg unit leaves more reserve. | Net payload at the specified workstation |
| Gripper and tooling | A 12 kg vacuum frame reduces a 50 kg rating to 38 kg of product. | Tool weight included in the rating |
| Centre of gravity | An eccentric or offset load increases overturning torque and can reduce capacity. | Allowable load centre and moment limit |
| Reach | Capacity can fall at maximum horizontal radius, even when the vertical lift is unchanged. | Load chart, minimum and maximum radius |
| Cycle rate | Fast pick, lift, rotate and release movements create dynamic loads and increase wear. | Cycles per hour, acceleration and duty cycle |
Ask for “50 kg net payload at [reach]” or “80 kg net payload at [reach]”, not only “50 kg” or “80 kg”. The supplier should show vertical travel, maximum reach, centre of gravity, gripper mass, mounting arrangement and cycle rate on the general-arrangement drawing and load chart.
Before choosing a material handling manipulator in Chennai, confirm:
- The quoted capacity applies at your actual reach and component orientation.
- The drawing shows the swept envelope, operator clearance and tooling position.
- The cycle includes every lift, traverse, rotation and release.
The Specification Sheet That Produces a Comparable Chennai Quote
A supplier cannot produce a comparable quote from “50 kg” or “80 kg” alone. Send a capacity-specific request such as “50 kg net payload at 1,200 mm reach” and define the workstation where that load will move.
1. Identify the load: part weight, dimensions, centre of gravity, lifting points, surface, gripping method, release behaviour and required changeover. State whether the payload excludes the hook, gripper, fixture and tooling.
2. Specify movement: horizontal reach, vertical stroke, lift height, rotation angle, approach direction, cycle rate, duty cycle and required positioning accuracy. Attach photos or a layout showing the pickup and deposit points.
3. Request a general-arrangement drawing and load chart. Require reach, stroke, swept envelope, mounting footprint, operator clearance, utility connections and the position at which the quoted capacity applies.
4. Describe installation: Chennai site location, floor or column mounting, available air pressure and flow, electrical supply, foundation condition, access for delivery, anchoring, assembly, testing and operator training.
5. Separate the commercial scope. Ask for equipment, end-effector, controls, guarding, freight, installation, commissioning, taxes, delivery time and warranty as separate line items.
6. Check service support: response time, preventive-maintenance intervals, troubleshooting documents, and stock of seals, cylinders, sensors, drives, pendant controls and gripper spares.
Use the exact model code when comparing DRA quotations; “DRA” alone does not identify the mechanism. Hendo Industries can be included in the comparison, but apply the same drawing, payload and service checklist to every industrial manipulator supplier in Chennai.
That is how you make a manipulator price 50 kg 80 kg in Chennai comparison meaningful.
Related products
 | Manipulator The DRA-80 KGS Manipulator by Hendo Industries is a robust and efficient material handling solution designed to streamline industrial operations. View product → |
 | Manipulator The DRA-50 KGS Manipulator by Hendo Industries is a versatile and high-performance material handling solution designed to simplify lifting and... View product → |
Choosing 50 kg, 80 kg or a Different Handling Method
Choose 50 kg when the net payload at the required reach stays comfortably below 50 kg after subtracting the gripper, hook, tooling and fixture. It suits repeatable components with little weight variation; buying 80 kg capacity for a 25 kg part adds cost without improving the task.
Choose 80 kg when the load approaches the 50 kg limit, the centre of gravity is eccentric, reach reduces usable capacity, or future products and heavier tooling are likely.
That reserve can prevent unsafe overloads and a second purchase, but compare the DRA 80 kg manipulator price against the complete DRA 50 kg manipulator price, not headline capacity alone.
| Option | Best choice when | Main limitation |
|---|---|---|
| 50 kg manipulator | Frequent positioning at one workstation | Less reserve for reach and tooling |
| 80 kg manipulator | Variable or near-limit loads | Higher purchase and installation cost |
| Crane or hoist | Vertical lifting over a broad area | Slower, less precise positioning |
| Jib | One workstation beside a fixed column | Limited working envelope |
| Balancer | Light, repetitive hand-guided loads | Limited reach and payload |
| Vacuum lifter | Smooth, sealed sheets or panels | Fails with porous or damaged surfaces |
| Forklift | Pallets and loads moved between areas | Poor fit for precise placement |
| Trolley | Short, level-distance transport | Does not lift or orient the load |
Ask an industrial manipulator supplier in Chennai for the load chart, general-arrangement drawing, gripper failure protection and service-part availability. Include seals, cylinders, sensors, drives and pendant controls in the lifecycle comparison, because downtime can outweigh a lower quotation.
Frequently asked questions
What affects the price of a 50 kg or 80 kg manipulator in Chennai?
Price depends on rated capacity, arm reach, vertical travel, rotation, controls, mounting, end-effector tooling, safety features, installation, and commissioning.
How should you compare DRA 50 kg and DRA 80 kg manipulator prices?
Compare both models against the same specification: payload, reach, working envelope, movement, controls, tooling, mounting, delivery, installation, and warranty.
Is rated capacity the same as usable payload at the workstation?
No. Usable payload must account for the gripper, clamps, vacuum equipment, adapters, and the load position within the arm’s working envelope.
What information should you send an industrial manipulator supplier in Chennai?
Provide the component weight and dimensions, pickup and drop points, reach, lift height, rotation, cycle rate, mounting location, power supply, and preferred controls.
